Welcome to FizzWizz
Start here for FizzWizz documentation — install and commission your unit, run the Health Check, diagnose carbonation problems, and monitor your brewery from the dashboard.
Welcome to FizzWizz
The FizzWizz Bubbles Anywhere Edition is a carbonation management system for craft breweries. It automates forced carbonation in a brite tank: you set a target carbonation level, and the unit monitors product temperature and tank pressure to calculate and hold the finish pressure needed to reach it.
This documentation covers the FizzWizz hardware, the Health Check and troubleshooting procedures, and the BrewWizz dashboard and mobile app.
Where to start
New to the FizzWizz?
What it does, how it works, and what comes in the box.
Installing a unit
Plan the install, connect the pneumatics, and commission the unit.
Something is wrong
Diagnose carbonation, solenoid, sensor, and leak problems.
The four sections
| Section | What it covers |
|---|---|
| Get Started | What the FizzWizz is, how it works, how to operate it, and where to get support |
| Setup & Installation | Planning, physical installation, sensors, commissioning, and hardware servicing |
| Troubleshooting | The 7-check Health Check, symptom diagnosis, and component tests |
| Dashboard | Monitoring your brewery from the BrewWizz web dashboard |
| Mobile App | Monitoring on the go — currently in development |
Monitoring from anywhere
The FizzWizz is Wi-Fi enabled. Real-time carbonation and tank data can be viewed from a phone or computer throughout carbonation and packaging, and the recorded data can be used for quality control.
- The BrewWizz dashboard runs at bw-dash.allendale.biz and covers device health, telemetry charts, alerts, and billing.
- The mobile app brings the same monitoring to your phone. It is currently in development — see the Mobile App section for planned features.
Getting help
Parts and service for the FizzWizz are handled by Allendale Electronics, the authorized distributor and manufacturer of BrewWizz products. See Support & Parts for contact details.
If you are troubleshooting a specific problem, run the Health Check first. A completed results form with actual measured values is the single most useful thing you can provide when contacting support.